Temperature & Process Control

96X96X75

96X96X75

48X48X100

48X48X100

90-270V AC/DC, SMPS

Upper: RED, 4-Digit, 0.56"
Lower: GREEN, 4-Digit, 0.4"

RED, 4- Digit,0.56"

Upper: RED, 4-Digit, 0.4"
Lower: GREEN, 4-Digit, 0.3"

RED, 4-Digit, 0.4"

1˚C / 0.1 ˚C (For Range Less than 400 ˚C)

± 1% of FSD

By Front Push Buttons

HEAT MODE

Auto Tune PID

Plastic ABS Box with Front and Back

92X92

92X92

45X45

45X45

Flush panel mounting with side clamps fixed behind the Panel

"OPEN" message on display for Sensor Break and LED for Relay Status Indication

Relay turns OFF in case of Sensor Break

1 Set Point

The RTD sensor should be connected to the instrument by proper gauge cables to minimize errors due to cable resistance. For thermocouple sensor, compensating cable of proper type must be used.