PT-100 2W/3W
(0 to 99.9 ˚C
or -50.0 to +99.9 ˚C or -99.9 to +99.9 ˚C)
Control Output
Relay
230V AC, 5A
(1C/O or 2C/O)
SSR
12V DC ±2V
BUZZER
12V DC ±2V
Resolution
1˚C / 0.1 ˚C
Indicating Accuracy
±1% of FSD
Set Point
1 set point
Relay Action
HEAT MODE or COOL
MODE (Factory Set)
COOL MODE
Power Supply
230V AC ± 20%, 50 Hz
90-270V AC/DC, SMPS
Indication
Display for Sensor Break and LED
for Relay Status Indication
Protection
Relay Turns Off In Case
Of Sensor Break
Installation
The RTD sensor should
be connected to
the
instrument by proper
cables to minimize errors
due to cable resistance.
For thermocouple sensor,
compensating cable of
proper type must be used.
Cut Out (Mm)
68 X 68
68 X 68
45 X 45
Mounting
Flush Panel Mounting with side clamps fixed behind the panel
.jpg)
